TOP
產品服務: | 鎵回收專用樹脂 | ||
---|---|---|---|
產品型號: | CH-920 GA | ||
產品規格: | ISO | ||
產品品牌: | 杜笙Tulsion? | ||
所 在 地: | 北京市豐臺區 | ||
產品單價: | 1.00 | 計量單位: | 升 |
供貨總量: | 需預定 | 最小訂量: | |
更新時間: | 2025-01-21 | 有 效 期: | 2025-04-21 |
瀏覽次數: | 62144 |
企業名稱: | 科海思(北京)科技有限公司 |
---|---|
經營模式: | 貿易經銷 |
企業主頁: | http://cohesion.shop.258.com |
聯 系 人: | 朱衛峰 |
電 話: | 86-170-90831380 |
傳 真: | 86-- |
郵 箱: | |
郵 編: | 100070 |
地 址: | 北京市豐臺區 北京市豐臺區漢威國際廣場三區2號樓8層0407室 |
杜笙Tulsion? CH-920 GA
甲級丙烯酸大孔弱酸性陽離子交換樹脂--鎵回收專用高級樹脂CH-920GA
Tulsion? CH-920 GA 是一款具有“巨空狀”丙烯酸型復雜主體結構的弱酸性,氫型含水球狀離子交換樹脂。
Tulsion? CH-920 GA 由于其本身的大孔而具有優良的物理特性。它是為金屬離子的選擇性提取而專門研制生產的甲級產品。
Tulsion? CH-920 GA 具有極其優越的物理和化學穩定性。該產品顯示出良好的抗機械和滲透壓沖擊的能力,具有更長的使用壽命。且適合于在廣泛的PH范圍內使用。
典型特性(TYPICAL CHARACTERISTICS): Tulsion? CH-920 GA
型式/Type 大孔弱酸性陽離子交換樹脂/Macroporous weak acid cation exchange resin
主體結構/Matrix structure 交聯丙烯酸類共聚物/Cross linked acrylic copolymer
物理型式/Physical form 含水球狀/Moist spherical beads
離子型式/Ionic form 氫/Hydrogen
總交換樹脂( meq/ml ) 1.5 (min.)
粒徑范圍USS (濕) 16 to 50
網狀低于50 USS 比例 <2\%
有效尺寸/Effective Size mm 0.55 to 0.65
PH 范圍/pH range 0 to 14
允許溫度/Temperature Stability 50℃
溶解性/Solubility 不溶于任何溶劑
杜笙Tulsion? CH-920 GA
操作特性(TYPICAL CHARACTERISTICS): Tulsion? CH-920 GA
最大操作溫度/Operating Temperature(max) 50℃
樹脂床最小高度/Minimum bed depth (mm) 800
最大流速/Maximum Service flow rate 5-7 m3/hr/m3
逆洗膨脹空間/Backwash expansion space 50 to 70\%
測試(TESTING): Tulsion? CH-920 GA
離子交換樹脂的抽樣和測試是按標準的測試程序,即ASTMD - 2187和IS - 7330,1998.
包裝(PACKING): Tulsion? CH-920 GA
Super Sack | 1000 lit | Super Sack | 35 cft |
MS drums | 180 lit. | MS drums | 7 cft |
HDPE lines Bags | 25 lit. | HDPE lines Bags | 1 cft |
For Handling, Safety and Storage requirements please refer to the individual Material Safety Data Sheets available at our offices. The data included
herein are based on test information obtained by Thermax Limited. These date are believed to be reliable, but do not imply any warranty or performance
guarantee. Tolerances for characteristics are per BIS/ASTM. We recommend that the user should determine the performance of the product by testing on
his own processing equipment.
For further information, please contact::